BRADLEY FAUCET-MOUNT EYEWASH STATION W/ GOOSENECK
Buy with Confidence:
Product Description
Laboratory Application
Low-cost eyewash mounts easily to both standard and gooseneck faucets.
For eyewash use, leave cold water supply on at all times. To operate unit pull diverter pin toward user.
For faucet use, water flow is activated by the use of the shutoff pin. Push the pin to the opposite side for water flow.
To eliminate the risk of scalding eyes during use, it is recommended that hot water supply to the faucet be disconnected or that tempered water be provided
Chrome-plated brass sprayhead assembly with twin soft-flow eyewash heads and highly visible yellow plastic protective covers.
Safe, steady water flow under varying water supply conditions from 30-90 PSI is assured by integral flow control in the sprayhead assembly.
NOTE: The ANSI Z358.1 standard requires an uninterruptible supply of flushing fluid at a minimum 30 PSI flowing pressure.
Chrome-plated brass adapter with aerated flow replaces faucet aerator; provides for eyewash mounting to faucet.
Chrome-plated brass diverter attaches to adapter. Provides for one-step activation which complies with ANSI Standard Z358.1 when installed and used properly.
Standard thread on fixtures fits standard or gooseneck faucets with 55/64 in. x 27 thread (male). Unit is also provided with two adapters to convert the standard thread to fit faucets with 15/16 in. x 27 thread (female) and 13/16 in. x 27 thread (female).
Optional adapters available, sold separately.
Universal Identification Sign and Inspection Tag Included
Complies with American National Standard Z358.1
Low-cost eyewash mounts easily to both standard and gooseneck faucets.
For eyewash use, leave cold water supply on at all times. To operate unit pull diverter pin toward user.
For faucet use, water flow is activated by the use of the shutoff pin. Push the pin to the opposite side for water flow.
To eliminate the risk of scalding eyes during use, it is recommended that hot water supply to the faucet be disconnected or that tempered water be provided
Chrome-plated brass sprayhead assembly with twin soft-flow eyewash heads and highly visible yellow plastic protective covers.
Safe, steady water flow under varying water supply conditions from 30-90 PSI is assured by integral flow control in the sprayhead assembly.
NOTE: The ANSI Z358.1 standard requires an uninterruptible supply of flushing fluid at a minimum 30 PSI flowing pressure.
Chrome-plated brass adapter with aerated flow replaces faucet aerator; provides for eyewash mounting to faucet.
Chrome-plated brass diverter attaches to adapter. Provides for one-step activation which complies with ANSI Standard Z358.1 when installed and used properly.
Standard thread on fixtures fits standard or gooseneck faucets with 55/64 in. x 27 thread (male). Unit is also provided with two adapters to convert the standard thread to fit faucets with 15/16 in. x 27 thread (female) and 13/16 in. x 27 thread (female).
Optional adapters available, sold separately.
Universal Identification Sign and Inspection Tag Included
Complies with American National Standard Z358.1