- Combination eyewash and shower safety station - Two GS PLUS spray heads deliver a flood of water for rinsing eyes - Spray heads have flip top dust covers, internal flow control and filter to remove impurities from water - Eyewash bowl is made of 11-1/2" ABS plastic - Eyewash valve is 1/2" IPS chrome plated brass stay-open ball valve, US made with Teflon seals. - Shower head is 10" diameter and made of orange ABS plastic - Shower valve is 1" IPS chrome plated brass stay-open ball valve, US made with Teflon seals. - Stainless steel actuating arm and 29" stainless steel pull rod - Pipe and fittings constructed of Schedule 40 galvanized steel and furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance - Supply: 1-1/4" NPT female top or side inlet - Waste: 1-1/4" NPT female outlet - Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples - Furnished with ANSI compliant identification sign - Valve and spray heads are factory assembled and water tested prior to shipment

- Faucet-mounted eyewash station - Converts any faucet into an emergency eyewash station without interfering with normal faucet operation - Can be installed at any sink, close to where accidents might occur - In an emergency unit is quickly activated, and provides an unlimited supply of potable water for rinsing the user’s eyes. - Outlet heads are mounted 3" apart and deliver a soft, aerated flow of water - Angle of heads is adjustable to permit full coverage and avoid splashing, furnished with float-off dust covers to protect outlet heads - Forged brass diverter valve - Pull knob to activate eyewash; water pressure holds eyewash in operation, leaving user’s hands free - Furnished with three adaptors (15/16"-27, 13/16"-27 and 3/8" IPS) for installing on most commonly used faucets - Outlet is furnished with removable aerator on bottom. - Each unit is completely assembled and water tested prior to shipment.

- Faucet-mounted eyewash station - Converts any faucet into an emergency eyewash station without interfering with normal faucet operation - Can be installed at any sink, close to where accidents might occur - In an emergency unit is quickly activated, and provides an unlimited supply of potable water for rinsing the user’s eyes. - Outlet heads are mounted 5" apart and deliver a soft, aerated flow of water - Angle of heads is adjustable to permit full coverage and avoid splashing, furnished with float-off dust covers to protect outlet heads - Forged brass diverter valve - Pull knob to activate eyewash; water pressure holds eyewash in operation, leaving user’s hands free - Furnished with three adaptors (15/16"-27, 13/16"-27 and 3/8" IPS) for installing on most commonly used faucets - Outlet is furnished with removable aerator on bottom. - Each unit is completely assembled and water tested prior to shipment.

- Eye wash station for wall mounting - Two GS-Plus spray-type spray heads deliver a flood of water for rinsing eyes. - Spray Head Assembly: Two FS-Plus spray heads. Each head has a flip top dust cover, internal flow control and filter to remove impurities from the water flow. - Valve: 1/2" IPS chrome plated brass stay-open ball valve, US made with Teflon seals - Bowl is 11 1/2 diameter orange ABS plastic. - Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish for mounting - Supply: 1/2 NPT female inlet. - Waste: 1 1/4 NPT female outlet - ANSI-compliant identification sign. - Unit is completely assembled and water tested prior to shipment.